INFOSEC UPS SYSTEM R1 600VA Notice D'utilisation page 2

To ensure this product is correctly installed and used appropriately, we highly advise you to
read this user guide very carefully.
1 . I N T R O D U C T I O N
Designed to be extremely efficient and user-friendly, R1 is the perfect AVR to protect your
sensitive electronic equipments.
2 . M A I N C H A R A C T E R I S T I C S
 Accepts wide input voltage range
 Provides stable output voltage
 Compact size.
3 . S A F E T Y I N S T R U C T I O N S – S e c u r i t y
 Risk of Electric Shock:

The AVR unit uses potentially hazardous voltages. Do not attempt to disassemble
this equipment as it does not contain accessible components that can be repaired by
users.

All repairs should be performed by qualified technicians only.

The utility power outlet shall be near the equipment and easily accessible. To isolate
the AVR from AC input, remove the plug from the utility power outlet.

Install the AVR in a temperature and humidity-controlled indoor area free of
conductive interference.

It should not be exposed to direct sunlight or sources of heat. Do not cover the
ventilation slots.

Disconnect the AVR from AC power before cleaning with a damp cloth (no cleaning
products).

In an emergency situation, switch the AVR to the "Off" position and disconnect the
unit from the AC power supply.
 When the AVR is out of order, please refer to "section 8: trouble shooting" and call
the hot line.
 Connected products:

Make sure that the connected load does not exceed AVR capabilities. Do not leave
any recipients containing liquid on or near the AVR.

Do not plug the AVR input into its own output socket.

Do not plug the AVR into a power strip or surge suppressor.

The AVR has been designed for sensitive equipments. It should not be used with
equipment with inductive loads such as motors.

Do not connect any household appliances such as vacuum cleaners or life-support
systems to the AVR.

Due to excessive consumption, laser printers should not be connected to the AVR.
4 . S T O R A G E I N S T R U C T I O N S
Please keep or use the AVR in an environment which is
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
2
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 08 11 AA 59 203 12
User guide