Osd Messages; Remote Control Problems - Dell W4200HD Manuel D'utilisation

FILE LOCATION: C:\Documents and Settings\solinak\Ƈ¦±\OM update\ch5e.fm

OSD Messages

While using your TV display, the following messages may appear.
Message
Auto Adjust
Out of Range
No Video Input
TV Button Lock
Self Test

Remote Control Problems

Problem
The TV display does not respond
when using the remote control
DELL CONFIDENTIAL – PRELIMINARY 10/8/04 – FOR PROOF ONLY
38
Troubleshooting Problems With Your TV
Possible Solution
No action required, the TV display is performing an auto
adjustment.
Check the optimal resolution settings.
You may need to download a new video driver. For more
information, go to support.dell.com.
1
Check all cables are properly connected.
2
Ensure the proper source is selected. See "Input Select" on page 26
for more information.
To unlock, press Menu on your remote control, select Setup.
Appears for computer source when there is nothing plugged in.
Select VGA or DVI from Input Select menu and nothing is plugged
in. Plug a computer in to the VGA or DVI connector.
Possible Solution
1
Point the remote control directly at the lower right corner of the
TV display. Be sure that nothing is blocking the front of the TV
display. For the location of the IR, see "Front View" on page 5.
2
Verify that the batteries are properly installed.
3
If the batteries are old, install new batteries.
NOTE:
Bright lights or other infrared devices may interfere with your
remote control and IR on the TV display.