Installation Instructions; Install The Water Dispenser Components (Non-Metal Door Models); Install The Water Dispenser Components (Metal Door Models) - Norcold Ultraline 1210 Instructions D'installation Et D'utilisation

Install the Water Dispenser Components (non-metal door models)

1. Install the back splash assembly (See Art01795):
- Put the hook on the bottom of the back splash assembly [4]
down into the slot [5] of the water dispenser panel.
- Align the two (2) rectangular mounting studs on the rear of the
back splash assembly with the two (2) mounting lugs [6] on the
water dispenser panel.
- Using equal pressure, push both mounting studs into the
mounting lugs at the same time.
- The mounting studs should engage and lock into the mounting
lugs with a "click" sound.

Install the Water Dispenser Components (metal door models)

1. Install the back splash assembly (See Art01795):
- Put the hook on the bottom of the back splash assembly [4] down into the slot [5] of the water dispenser panel.
- Align the two (2) rectangular mounting studs on the rear of the back splash assembly with the two (2) mounting lugs [6] on the
water dispenser panel.
- Using equal pressure, push both mounting studs into the mounting lugs at the same time.
- The mounting studs should engage and lock into the mounting lugs with a "click" sound.
Owner's Manual 8

Installation Instructions

6
5
Art01795
4