Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Do not burn or incinerate battery packs. Battery
packs may explode, causing personal injury or dam-
age. Toxic fumes and materials are created when
battery packs are burned.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY RULES FOR
COMPACT BLOWER
• Before using the blower, read this operator's
manual, your battery pack and charger opera-
tor's manuals, and all labels on the blower, bat-
tery pack, and charger.
• Wear ear protectors. Exposure to noise can cause
hearing loss.
•
To reduce the risk of injury in ap-
WARNING
plications that produce a consid-
erable amount of dust, use an OSHA compliant
dust extraction solution in accordance with the
solution's operating instructions.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
READ AND
SAVE ALL
INSTRUCTIONS
FOR FUTURE USE
FUNCTIONAL DESCRIPTION
1. Trigger
2. Lock-on switch
3. Air flow control
4. Handle
5. Intake
6. Nozzle
7. Extension
8. Inflator/Deflator
attachment
6
2
1
7
8
Cat. No. ..................................................... 0884-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Air Speed ..................................................160 MPH
Fan Speed ...........................................18,000 RPM
Recommended Ambient
Operating Temperature ......................0°F to 125°F
C
US
WARNING
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
may be hazardous.
Installing/Removing the Accessories
3
4
Blower:
To install the nozzle, extension, or inflator adaptor,
line up the lugs of the accessory with the slots on the
blower. Push the accessory onto the blower. Twist
the accessory clockwise to lock into place.
To remove the accessory, twist counter-clockwise
and pull away from the blower.
Deflator:
To install the adaptor onto the intake, line up the de-
5
tents on the adaptor with the tabs on the top and bot-
tom of the intake. Slide the adaptor onto the intake.
To remove the adaptor from the intake, pull the
adaptor away from the tool.
3
SPECIFICATIONS
SYMBOLOGY
Volts
Direct Current
Read operator's manual
Wear eye protection
UL Listing for Canada and U.S.
ASSEMBLY
Recharge only with the charger
specified for the battery. For spe-
Always remove battery pack before
changing or removing accessories.
Only use accessories specifically
recommended for this tool. Others
Publicité
Table des Matières
