HKC M27G1 Guide De L'utilisateur page 10

Thank you for purchasing our monitor. Read this user manual carefully and keep it handy in
the future to get the most out of this monitor.
1. Place the monitor in the room so that no direct light reflects on the screen. Both reflections and
a completely dark environment can be stressful on the eyes.
2. Leave enough space for ventilation between your monitor and the wall.
3. Avoid extremely high temperatures to avoid possible damage to your monitor.
4. Always use original accessories.
5. Do not place the monitor near heat sources such as radiators, direct sunlight, or in closed areas.
Do not cover the vents when the monitor is in use.
1. DO NOT expose the monitor to extremely high temperatures (below 5 ° C and above 35 ° C) or
extreme humidity (below 10% and above 75%).
2. DO NOT expose the monitor to direct sunlight.
3. Do not allow the monitor to come into contact with liquids.
4. Remove the plug from the socket and during thunderstorms (especially during lightning).
5. Do not walk on the cable and make sure the cable is fully unrolled.
6. Do not overload outlets or extension cords as this can result in a risk of fire or electric shock.
7. Use a soft, dry cloth (without volatiles) to clean the monitor.
8. Do not attempt to repair the monitor yourself if it is defective. Contact us by sending an email to
service@hkc-eu.com.
FCC-NOTICE
Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
Introduction
INSTALLATION
SAFETY REGULATIONS
CLASSIFICATION
10