Identification Of Problems And Problem Solving - CVTECH Freedom Electra Mode D'emploi

If the "MOTOR MAINTENANCE" LED lights up you must get in contact with the Technical Assistance
Service.

8. IDENTIFICATION OF PROBLEMS AND PROBLEM SOLVING.

For any other queries get in touch with your nearest Technical Service Centre or with our Technical
Department who will be pleased to assist you.
MALFUNCTION
The central vacuum unit won't work
One inlet valve is not working
The suction of the unit is
not as normal
The central vacuum unit won't
switch off
USER GUIDE
CAUSE
The power cable is disconnected
The low-voltage line is disconnected
The hose is not correctly inserted into the inlet valve
There is a problem with the motor
The inlet valve is in a poor condition
The filter needs cleaning
Another inlet valve is open or is not working correctly
The dust container is full or not located correctly
The hose or accessories are in poor condition
There is a blockage in the hose or the ducting
The microswitch on one of the inlet valves is broken.
SOLUTION
Connect
Connect
Check
Call Service
Call Service
Clean or replace
Close or replace
Check
Substitute
Call Service
Call Service
20