Description And Components - CVTECH Freedom Electra Mode D'emploi

3.2 DESCRIPTION AND COMPONENTS

FREEDOM MODEL
1. PANEL
2. RESET BUTTON
3. LOW VOLTAGE LINE
4. POWER SUPPLY SWITCH
5. ELECTRICAL SUPPLY
CABLE
6. HOLDFAST HANDLES
OF DETACHABLE DUST
CONTAINER
ELECTRA MODEL
POWER
RESET
USER GUIDE
15. LED PANEL
16. LOW VOLTAGE LINE
17. ELECTRICAL SUPPLY
CABLE
18. HOLDFAST HANDLES OF
DETACHABLE DUST
CONTAINER
7
6
5
POWER
RESET
4
POWER: When the green LED-light is lit this indicates that the
system is switched on and ready for use.
DUST CONTAINER FULL: When illuminated the dust
1
container needs emptying.
2 ON: When the green LED-light is lit the system is connected to
the inlet valves.
3 MOTOR: Call Technical Service.
Button -: Go back a page.
Button : Is the "enter" key.
Button : Go forward a page.
Button +: During programming procedures this button is used
to scroll through the numbers displayed.
4 PROG: Programming button which turns red when you enter
the programme mode.
5 PIN: This indicator turns red when you are setting the PIN.
FILTER: When this indicator is lit you need to clean the filter.
6
7 DISPLAY WINDOW: it shows any work state.
7. MOTOR
8. EXHAUST OUTLET
9. DIRTY AIR INLET
10. PROTECTIVE FILTER
11. HEPA FILTER
12. COVER HEPA FILTER
13. CYCLONIC CONE
14. DUST CONTAINER
1
2
3
14