Dynex DX-DA100501 Guide De L'utilisateur page 7

All manuals and user guides at all-guides.com
DX-DA100501 English - combined.fm Page 7 Monday, August 7, 2006 12:25 PM
Using the charger
- OR -
Slide the battery up, then press it down (depending on the battery to be
charged).
Do not force the battery onto the charger. If it does not slide easily into the
guides, re-align it and try again.
U
SING AN ADAPTER TRAY
Depending on your battery type, you may need to use an adapter tray. Refer to the
Battery Compatibility List to determine which adapter tray should be used with
your battery type.
To install the adapter tray onto the charger:
1 For adapter trays A, B, or C:
Slide the central notch on the adapter tray's upper edge into the slot on the
upper edge of the charger bay, then carefully press down on the lower edge
of the adapter tray.
The adapter tray snaps firmly in place. Install the battery so that its contacts
meet the contacts on the adapter tray.
Installing Adapter A Installing Adapter C
Installing Adapter B
7