USING THE COOKER
SELECTING A TEMPERATURE LEVEL
Temp. levels are marked on the knob.
• Turn knob to the desired warming level.
SWITCHING THE HOT PLATE ZONE OFF
• Turn the knob to the "OFF" position.
POWER INDICATORS
The Power On Indicator Light is lit up when the cooker is connected to the power supply.
SWITCHING THE INFRARED LAMP ON/OFF
Set the lamp switch to "ON" or "OFF" position.
SELECTING PANS
CAUTION! Thts appliance is designed for keeping food warm, do not use to cook or heat food.
Use pots and pans with flat, smooth bottoms.
GN 1/1 and GN 1/2 pans are recommended to use.
CLEANING AND CARE
Sugar and food containing sugar (i.e. marmalade) and melted plastic must immediately be
removed from the hot plate surface with the cleaning scraper. If not, the plate surface can be ruined while
it's cooling down.
Steam and/or pressure cleaning machines can't be used to clean the appliance! This can damage the unit,
resulting in the risk of personal injury.
Clean the plate surface after every use. Dirt that hasn't been removed will burn into the surface the next
time it's turned on and then these incrustations may be permanent.
Cleanser residues can cause discoloration the next time you turn on the cook top. Cloths and sponges that
have been used to clean other surfaces can cause discoloring, too.
DO NOT USE ANY
• aggressive or bleaching cleaning agents that contain active oxygen, chlorine or corrosive components.
• abrasive or aggressive cleaning or scouring agents like steel wool, soap-filled steel wool, metal or plastic
sponges or similar agents with an abrasive surface.
CLEANING THE HOT PLATE SURFACE
• Use the cleaning scraper to remove all food residue and fat splashes from the hot plate surface.
• When the plate surface has cooled, clean it with water and a small amount of detergent, with a cleanser
for glass ceramic surfaces. A soft brush or a soft sponge can also be used.
• Wipe off the surface with clear water.
• Dry it thoroughly.
REMOVE CAKING
Heavy dirt should be soaked first. Use a wet cloth for best results. It will be easier to remove the dirt.
CARE OF THE HOT PLATE SURFACE
Clean the glass ceramic surfaces with a cleanser to protect it from discoloring, and reduce the danger of
damage from sugar. It can also remove stains and discoloration.
688600-20-30 nl-en ma 2018
5