Cycle Settings - Sears Kenmore 970-C8808 Serie Guide D'utilisation Et D'entretien

Cycle Settings

For best results
Follow the fabric care label instructions
on items to be dried.
Appropriate drying Temperature, Dryness Level and Op-
tions will automatically be displayed for each cycle. The
settings can be changed before the cycle is started.
DRYING TEMPERATURE
To change the preset temperature, press the Temp button
to scroll to the desired setting.
To protect your fabrics, not all temperatures are available
with every cycle. The indicator will not light if the setting is
not available with that cycle.
NOTE
To change the Temperature after the cycle starts, press
PAUSE, adjust the setting and press START to resume the
cycle.
Max
Recommended for durable fabrics and towels.
High
Recommended for most cotton fabrics.
Normal
Recommended for wrinkle free, easy care, lightweight
fabrics and bulky loads.
Low
Recommended for delicate fabrics.
Air Fluff
This setting (no heat) should only be used with a Timed Dry
cycle to dry items containing feathers, down, foam rubber,
plastics or rubber-like materials; to refresh clothing, stuff ed
animal, pillows or blankets; and to dust draperies.
All manuals and user guides at all-guides.com
9
Operating Instructions
DRY LEVEL (Auto Dry)
To change the preset level, press the Dry Level button to
scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels are available
with every cycle. If a Dry Level is not appropriate for the
cycle, it cannot be selected.
NOTE
To change the Dry Level after the cycle starts, press
PAUSE, adjust the setting and press START to resume the
cycle.
Select the Normal dry level for most Auto Dry cycles.
Occasionally a load may seem too damp or over-dried
at the end of the cycle. To increase drying time for similar
loads in the future, select a higher setting. For loads requir-
ing less drying time, select a lower setting.
Select Damp Dry for items you wish to partially dry be-
fore hanging or ironing.