Change Language - Scottoiler eSystem Universal Kit Mode D'emploi

All manuals and user guides at all-guides.com

Change Language

Press and hold both MENU and SET buttons for 6 sec.
f
On release the menu displays the languages.
f Use SET to choose language
The system will return to the previous screen after 6 sec. of inactivity.
Driving Screen
The driving screen is the default screen that provides you with the information you require during
general use of the eSystem. The following information is displayed:
Clock
Pump LED
Temperature
Flowrate: The flow rate represents the time in seconds
between drops of oil. The recommendation is for 60
seconds but this can be set from 20 (fastest flow) - 180
(slowest flow) seconds per drop or OFF (Ø). Pressing SET
will cycle through the settings.
The flow rate will default to OFF (Ø) when oil
L
reservoir is empty.
Pump LED: The pump LED will flash every pump stroke.
Temperature: The ambient temperature is displayed in
degrees Celsius (°C).
Oil Level: Displays the current level of oil present in the
reservoir(s).
Looking for more information about your motorbike?
Visit our model-specific installation guides for step-by-step instructions, installation
videos, set-up advice and more: www.scottoiler.com/mybike
Flowrate
Oil Level
Oiling Mode
Accelerometer
Oiling Mode: Indicates which mode the eSystem is
currently operating in;
 - Manual: The unit has been powered on without the
engine running.
- Startup: The unit has sensed that the engine is
running.
 - Oiling: The unit has sensed that the motorcycle is in
motion and is oiling the chain.
Accelerometer: Your acceleration is used to sense the
motion of the motorcycle and to turn oil flow on and
off. In addition the display also gives an instantaneous
representation of accelerometer readings shown in
g-force.
EN