Before First Use; How To Use - Kiwi KSB-2210 Manuel D'instructions

11. Do not touch the cutting edges of the blender blade unit when you clean it. They
are very sharp and you could easily cut your fingers on them.
12. If the blades get stuck, unplug the appliance before you remove the ingredients
that block the blades.
Caution
1. Always unplug the appliance before you assemble, disassemble or make
adjustments to any of the parts.
2. To prevent failure of the appliance, make sure that no food or liquid enters the
connection point of the blender jar on the motor unit.
3. Do not exceed the maximum level indicated on the accessories.
4. Never fill the blender jar with ingredients hotter than 80?.
5. To prevent spillage, do not put more than 1.0L of liquid in the blender jar, especially
when you process at a high speed. Do not put more than 0.8L in the blender jar when
you process hot liquids or ingredients that tend to foam.
6. If food sticks to the wall of the blender jar, switch off the appliance and unplug it.
Then use a spatula to remove the food from the wall.
7. Never forget to place the sealing ring on the blade unit before you assemble the
blender jar, otherwise leakage will occur.
8. Always make sure the lid is properly closed /assembled on the jar and the
measuring cup is inserted properly in the lid before you switch on the appliance.
Built-in safety lock
This feature ensures that you can only switch on the appliance if you have properly
assembled the blender jar on the motor unit. If the blender jar is correctly assembled,
the built-in safety lock will be unlocked.

BEFORE FIRST USE

Thoroughly clean the parts that will come in contact with food before you use the
appliance for the first time (see chapter "Cleaning")

HOW TO USE

The blender is intended for fine pureeing, chopping and blending. With the blender
you can prepare soups, sauces, milk shakes and batters. You can also use the blender
to process vegetables, fruit and meat.
1. Place the motor unit on the work-surface.
2. Place the sealing ring on the blade unit.
3. Assemble the blade unit onto the blade unit interface.
4. Screw the blade unit interface onto the bottom of the blender jar until it is fixed
properly. 5. Place the blender jar with the blade unit interface attached on the motor
unit and turn the jar until you hear a "click" (You can place the blender jar on the
motor unit in two positions: with the handle pointing to the right or to the left.
6. Put the plug in the wall socket.
7. Put the ingredients in the blender jar.
8. Add foods into the blender.
9. Place the lid on the blender jar (Close the lid by pushing it down firmly).
KSB-2210 User Manual
5