Setting The Language; Weekly Chrono Setting - Ferroli O100 Manuel D'installation, D'utilisation Et D'entretien

Ventilation can be set with P2 and P3. Depending on the heating unit connected, the following may appear:
P1 P2
The screen that appears depends on the type of heat generator connected, therefore it may not accurately reflect the manual.

3.6 Setting the language

From the main screen, select and hold P4 for 7 seconds. The display will show the languages screen.
P1 P2

3.7 Weekly chrono setting

From the main screen press P4 to access the chronothermostat weekly programming screen: it allows enabling of all the weekly chrono
functions.
Programming:
PR1
PR2
PR3
PR4
Press P2 and P3 to enable (or not) weekly programming. The CHRONO ON or OFF enabling status is shown in the top right of the display. In the
middle of the display is the table of heating unit START and STOP times, and alongside is the table indicating the reference day (1 to 7) of the
week.
Up to four weekly operation phases delimited by the set times and days can be set.
Select P4 to access the screen for setting the operation programs.
4
P1 P2
This manual is the property of Cola srl. Reproduction is prohibited without the permission of Cola srl, which reserves the right to make changes at any time and without prior notice
P3
With P2 and P3 it is possible to scroll and set the desired language from those
available. Press P1 to return to the main screen.
P3
P1 P2
Use P2 and P3 to scroll the operation programs to be set (PR1, PR2, PR3, PR4)
and press P4 to select one of them. Buttons P2 and P3 can be used to enable the
day and P4 to move to the next window element. After deciding the days to enable,
press P4 to set the START and STOP time.
P3 P4
for the purpose of improving its product
Ventilation is settable from a minimum
value of 1 to a maximum of 5
Ventilation can also be set with the
AUTOMATIC function
Double ventilation, settable with values
from 1 to 5 with the addition of the
AUTOMATIC function.
P3 P4
Do the programming carefully, without overlapping the activation and/or
deactivation times on the same day in different programs.
15
Enabling status
CHRONO
(ON/OFF)
Table days of the
week
Table of START
and STOP times
DISPLAY UTILITY