Beper 90.882 Mode D'emploi page 9

EN
Electric Oven Use instructions
Do not immerge into water. When the oven is hot do not put water
on the door. Do not use the appliance is the door is damaged. When
using and after, metallic parts and the door are very hot : only touch
the handle and select switch. Always use the rack handle to move
the oven rack and the baking tray. Pay attention when moving boiled
liquids.
Components Fig.A
1. Thermostat Knob
2. Indicator Cover
3. Timer Knob
4. Crumb Tray
5. Glass Door
6. Door Handle
7. Wire Rack
8. Food Tray
How to use
Baking
Put the foods on toaster oven after about 10 minutes preheating, the suggested temperature is about 200-
230°C. Temperature and time is based on food type and thickness. Usually the proper temperature for baking
the food like bread is 200°C.
When baking, the upper and lower heating elements will cycle on and off to maintain the constant temperature.
When baking is finished, turn the Time knob to "off" position.
Remove the food from the oven carefully.
Care and cleaning
Before cleaning unplug the toaster oven and allow it cool completely.
Wash all the attachments with mid, soaped water including the wire rack and food tray.
Immerse the attachments in the water to wash them completely; 4. Using a wet and soft cloth to wipe the inner
of the oven.
To clean the door by using a wet cloth saturated with detergent or soap.
Do not wipe the two metal covers of the Heating Element with brushes.
After cleaning the parts, install the wire rack along the slots in oven cavity and place the food tray on the wire
rack.
Do not use any metal pad to clean the surfaces.
Do not use abrasive cleansers, scrubbing brushes and chemical cleaner as this will cause damage to
the nonstick coating of food tray. Abrasive products such as easy off oven cleaner or similar are not
suitable for the care and cleaning of this oven as it is not lacquered.
To store
Unplug unit, allow to cool, and clean before storing. Store Electric Oven in its box in a clean, dry place. Do not
put any stress on the cord where it enters the unit, as it could cause the cord to fray and break.
Specifications
Rated Power: 1050W
Rated Voltage and Rated Frequency: 220-240V~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
9