Getting Started - Mackie MP-320 Mode D'emploi

GETTING STARTED

1. Select and attach one ear tip
per in-ear monitor. It should
easily attach by applying light
pressure, but you may find that
you have to rotate the ear tip
back-and-forth until it's secure.
2. Your ears are important to
us! Be careful of permanent
hearing damage. Lower the
volume on your device. Even
intermediate levels may be
painfully loud. Always turn
the volume all the way down
before connecting the in-ear
monitors or doing anything
new that may affect the
headphone volume. Then
turn it up slowly as you
listen carefully.
3. Plug the connector of the
in-ear monitors into the
device.