General Information On The Operation - Kärcher SensoTimer ST6 eco!ogic Mode D'emploi

Description of the display
Illustrations on Page 2
1 Radio signal and field strength
2 Battery status sensor
3 Tripping limit soil moisture
4 Measured soil moisture
5 Sensor 1 / water outlet 1
6 Irrigation / manual irrigation
7 Sensor 2 / water outlet 2*
8 Battery status control unit
9 Time / time of irrigation
10 Irrigation duration
11 Irrigation delay (eco!ogic function)
12 Break button and setting of the time
13 menu / esc button
14 OK button
15 Arrow keys
* depending on model
Description of the Appliance
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Illustrations on Page 3
A G 3/4 reducer
B G1 water connection with pre-filter
C Top part of the casing for two-channel
appliance*
D G 3/4 hose connection
E Tap connection adapter
F Control unit
G Battery compartment
H Display
I Keypad
J Sensor 1
K Sensor 2*
L Sensor cap
M Cover sensor pad
N Sensor pad
O Eyelet for theft protection*
P Notches for wall mounting
Q Top part of the casing for single-chan-
nel appliance* (rear view)
* depending on model
General information on the
Basic functions of the enter keys
 Flashing values are changed by means
of the arrow keys.
 OK button completes an entry and
switches to the next entry field. It also
completes the entry in the last entry
field and then switches into the auto-
matic mode.
 esc button discards an entry and
switches to the previous entry field or
exits the entry at the first field and
switches into the automatic mode.
 If no button is pressed for 30 seconds,
the appliance returns to the automatic
mode.
During the initial startup, it can individually
be selected for each water outlet how it is to
be operated:
 In order to get to the automatic mode, at
least 1 sensor must be used or the de-
vice must be taught for time control.
Otherwise the water outlets for auto-
matic watering are inactive.
 Sensor-controlled
The sensor is taught during the 60-sec-
ond countdown, i.e. the radio signal is
detected automatically.
 Time-controlled
The teaching process of the sensor is
cancelled with the esc/menu button
during the 60-second countdown.
In this case, the moisture tripping limit
at the control unit can not be set.
 Locked / inactive
The 60-second countdown passes
completely without the recognition of
the sensor or the esc/menu button be-
ing pushed, then the water outlet is in-
active. After deactivation of water outlet
1, the countdown for outlet 2 can be en-
abled with the OK button.
– 3
EN
operation
13