Extremis Sol+Luna Australis Instructions De Montage page 13

Stainless steel table support
Stainless steel is not resistant to sea water. Especi-
ally in an aggressive environment (maritime climate,
chlorine, acid rain, aggressive industrial or urban
surroundings), we advise you to clean the surface
regularly. Suitable products for cleaning stainless
steel are widely available.
MiraClean sponge
Only use the MiraClean sponge when normal cle-
aning with lukewarm water, gentle soap and a soft
sponge is insufficient.
If stubborn stains are still visible after cleaning
(see product manual), these may be removed with
the sponges supplied. Moisten the sponge a little
with ordinary water and rub it over the stains to be
cleaned. Do not rub too hard, as this could cause
matt patches.
There is no need to use detergents. Water alone is
sufficient.
The MiraClean is made of melamine resin and wears
away with use. The sponge is very easy to use and
works up to 26 times more quickly than a traditio-
nal microfibre cloth. The sponge removes the most
stubborn stains with no extra effort.
Do not use on shiny surfaces.
The MiraClean scouring sponge is the solution for
removing stubborn stains such as felt tip, grease,
shoe streaks, limescale marks, coffee and tea. The
MiraClean can be used on tarpaulins, PVC, glass,
steel, chrome, aluminium, porcelain, artificial
leather and many types of floor.
For more information, contact Extremis at info@
extremis.be
English – 13