Prestigio Data Safe III Guide Rapide page 2

2. To Install SecureDriveEX
Warning: The Partitioning action will delete all the
data in the device. This action is not reversible. Please back
up all necessary data, and close all active programs and
windows on the computer before performing this
2
1. Connect Prestigio Data Safe III to the host computer by the
USB cable provided.
2. Double click on "Setup.exe" in "SecureDrive" folder to start
installation.
3. Please click on the SecureDrive EX License Agreement and
read through the agreement for legal usage.
4. Place a check in the box and then click «Next».
5. A dialog box will pop up asking for firmware update
confirmation. All data will be deleted permanently if executed.
Click "Yes" to continue or click "No" to cancel firmware
update.
6. The firmware update process should not take more than 1
minute depending on the host computer capability.
7. When the process is completed, please turn off Prestigio
Data Safe III and disconnect it from the host computer.
8. Please reconnect Prestigio Data Safe III to the host
computer and turn on its power to proceed.
9. As shown in the diagram, Prestigio Data Safe III storage
will be divided into two sections, namely security section and
public section.
10. The capacities of two sections can be adjusted by clicking
and dragging the pointer horizontally. You can also customize
a specific size by typing into the appropriate box.
11. Click "Next" to continue the partitioning process.
12. A dialog box will pop up asking for partitioning confirmation.
All data will be deleted permanently if executed. Click "Yes" to
continue partitioning process or "No" to cancel action.
13. Partitioning process should not exceed 3 minutes depending
on the computer capability. Please turn off Prestigio Data Safe
III and disconnect from host computer after completion.
14. Reconnect Prestigio Data Safe III.
15. A window will pop up requesting for further instruction.
Highlight "Run the program" option and click "OK" to continue
installation process.
16. A SecureDrive EX window will pop up for authentication.
Please refer to yellow sticker at the last page of quick guide
for serial key. Enter those numbers in the text fields provided.
Click "OK" to Finish.
Data Safe III