D-Link DIR-842 Guide D'installation Rapide page 3

OPTION 1 QRS MOBILE APP SETUP
1
Scan the QR code below to download the QRS Mobile app from the App
Store or from Google Play and launch it.
/
Note: Please check the app store for device requirements and compatibility. Not all D-Link
products are supported by the QRS Mobile app.
2
Once the app is installed, you may now configure your device. Connect to
the device wirelessly by going to the wireless utility on your device. Scan for
/
the wireless network name as listed on the supplied Wi-Fi Configuration Card.
Select the network and then enter the password.
Wi-Fi
3
Once you connect to the device, tap on the QRS Mobile icon from your
mobile device, then tap Start to continue. Follow the on-screen instructions
/
to complete the setup.
Wi-Fi Name: dlink-XXXX
Password: XXXXXXXX
QRS Mobile
1