Installation - HAMPTON BAY HB7058-304 Guide D'utilisation Et D'entretien

Installation

1
Mounting the hardware

Thread the fixture screws (EE) into the
provided holes of the mounting bracket
(FF).

Thread the hex nuts (BB) onto the fixture
screws (EE). Do not tighten the hex nuts
(BB) at this time.

Pull the supply wires out from the outlet
box and mount the mounting bracket (FF)
to the outlet box using the mounting
screws (DD).

Place the back plate of the fixture body (A)
over the outlet box and onto the fixture
screws (EE).

Adjust the fixture screws (EE) until they
protrude out from the back plate 1/4 in.

Remove the fixture body (A) and secure
the position of the fixture screws (EE) by
tightening the hex nuts (BB) against the
mounting bracket (FF).
2
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.

Connect the black supply wire to the black
fixture wire using a wire nut (CC).

Connect the white supply wire to the white
fixture wire using a wire nut (CC).

Connect the fixture ground wire to the
supply ground wire using a wire nut (CC).

Wrap all wire connections with electrical
tape for a more secure connection.
DD
EE
BB
A
5
Please contact 1-855-HD-HAMPTON for further assistance.
FF
FF
CC
HAMPTONBAY.COM