Care and Cleaning
EXTERIOR MAINTENANCE
Use a dry or slightly dampened clean
cloth and wipe the surface of the fixture.
INTERIOR MAINTENANCE
Disconnect power to the fixture by turning
off the circuit breaker or by removing the
fuse at the fuse box.
Use a dry or slightly dampened clean
cloth to wipe the interior surface of the
fixture.
Troubleshooting
Problem
The light will not turn on.
The fuse blows or the circuit breaker trips
when the light is turned on.
NOTE: Do not use any cleaners with chemicals,
solvents, or harsh abrasives. Use only a dry
soft cloth to dust or wipe carefully.
Solution
Make sure the power supply is on.
Test or replace the switch.
Check the wiring.
Check the wire connections.
7
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM