Ickle Bubba Astral Mode D'emploi page 11

Moon Chassis
Step 1: Adapter Attachment
Please insert each adapter into the car seat before attaching to the chassis.
Step 2 Car Seat Attachment
Please line up the adapters with
each side of the chassis before
pushing down on each side. Please
be aware that even pressure wilI
need to be placed on both sides at
the same time when pushing
downwards.
0/
Step 4: Removing the Adapters
Please firmly press down the 'release
buttons' on either side of the car seat which
are located under the fabric cover and lift
off. Please refer to the grey indicator tabs to
locate the 'release buttons'.
Installing on to Pram
l
"Click"
Step 3: Removing the Car Seat
Please press the circular buttons located on the
pram frame, underneath the adapters and lift.
Note: The Car Seat Adapters will remain in the
car seat, and can remain attached during use
V.01.21
10