Cleaning The Record Player; Electric Shock; Cleaning The Stylus And The Record; Replacing The Stylus - TechniSat TechniPlayer LP 200 Mode D'emploi

Cleaning the record player

Cleaning the record player

Electric shock

To avoid the danger of an electric shock, you must
not clean the unit with a wet cloth or under running
water.
CAUTION!
Do not use any scrubbing sponges, cleaning powder or
solvents such as alcohol and petrol. To clean the
appliance and the records, only use cleaning agents that
are specifically designed for the purpose (antistatic).
These are available in an accessories store.
Clean the housing with a soft cloth moistened with
water.

Cleaning the stylus and the record

Always clean the stylus and record before playback to
prevent premature wear.
Use a cleaning brush to wipe from back to front over
the stylus.
To clean a record, use a record cloth to wipe lightly
and diagonally over the record.
20

Replacing the stylus

The stylus is naturally exposed to wear by the playback
process. Therefore we recommend regular inspection,
which for diamond styluses should take place after at
least 500 playing hours.
Note:
Worn or damaged (splintered) styluses ruin records.
When you need to replace a stylus, use the original type
if possible.
Remove the stylus by pulling diagonally downwards.
Insert the stylus by doing the reverse of this.