Oven Door: Remove And Re-Install - Samsung NX58M6850SS Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Oven Door: Remove and Re-Install

To remove the oven door
1.
Turn off the oven.
2.
Fully open the oven door.
3.
Pull the hinge locks away from the oven body and down toward the door
frame into the unlocked position.
1
2
WARNING
The door is very heavy. Be careful when removing and lifting the door. Do not
lift the door by the handle.
Take care when moving the oven door. Improper handling could result in
physical injury.
To prevent electric shock, make sure the oven is turned off before removing
the oven door.
NX7000K_VE_NX58M6850SS_AA_DG68-00909A-04_EN+MES+CFR.indb 43
Hinge lock
Locked position
Unlocked position
4.
Close the door to 5 degrees from
vertical. This is the removal position.
5.
While holding both sides of the oven
door tightly, lift it up and out until the
hinge arms come clear of the slots at
the bottom of the oven door.
Place the door in a safe location.
6.
To re-install the oven door
NOTE
You can re-install the upper door the same way you re-install the full door.
1.
Firmly grasp both sides of the door at the top.
2.
With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
Hinge arm
Bottom
edge of
slot
Indentation
3.
Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
Push the hinge locks up against the front frame of the oven cavity into the
4.
locked position.
Unlocked position
5.
Close the oven door.
Hinge lock
Locked position
English 43
2018-08-29
5:15:10

Publicité

Table des Matières
loading

Table des Matières