Nidec-Shimpo RK-3D Mode D'emploi page 4

Set-Up
The following steps should be followed BEFORE operating the wheel
1. Remove wheel from shipping box.
2. Place wheel on a fi rm and stable work surface.
3. Foot pedal and splashpan are shipped
dis as sem bled.Remove them from their
packing material.
4. Install pedal.
5. Level the wheel.
6. Attach the Two-Piece Splashpan to the wheel, seating it under the fl ange
of the bear ing holder (under the wheelhead)
splashpan:half(partA)
Wheel head
5
Level the wheel.
plastic clip
1.Insert splashpan half (part A) into
the groove (recess) on the bottom
of the bearing holder.
2.Insert splashpan half (part B) into
the across from partA.
3.attach the plastic clip.
splashpan:half(partB)
3
6
Attach the Two-Piece
Splashpan
4
Install pedal.