BST V10A Manuel D'utilisation page 3

DESCRIPTION
© Copyright LOTRONIC 2014
1. INPUT
Connect on this socket ( Combo XLR - Jack ) a line level
device as cd player, DVD player, mixer,....
2. LINK OUTPUT
This ouput is same signal as the input. Connect this
output to an other activ speaker or to a power amplifier
3. LOW TONE CONTROL
This control is used to adjust low frequencies of master
signal
4 HIGH TONE CONTROL
This control is used to adjust high frequencies of master
signal
5. LEVEL CONTROL
This control is used to adjust main level control of the
subwoofer.
6. AC SOCKET
Before to connect the ac cord on this socket, make sure
that the available voltage is not higher than stated at the
end of this manual
7. POWER SWITCH
This switch is used to to switch the subwoofer built-in
power amplifier on or off.
V10A-V12A-V15A Page 3