Important; Maintenance And Cleaning - Stadler Form Sam Mode D'emploi

Setting TIMER OFF
This setting is optimal for programming the air conditioner to turn off at a
specified time. For example, you can specify the time to turn it off and go to
bed. When you set TIMER ON, the air conditioner will turn off automatically
after a specified delay.
Example: Programming turn-off after 10 hours.
1. Press TIMER OFF. The letter 'h' will appear on the remote control display
along with the previous TIMER OFF settings.
2. Press the TIMER OFF until '10h' appears on the remote control display.
3. After a few seconds, the display will show the specified temperature,
the timer function will be activated, and the air conditioner will turn off
automatically 10 hours later.
On
Set
On — air conditioner is on
Set — specified values
Setting both timers
Turn off  Turn on
(Air conditioner operates  Programming turn-off  Programming turn-on)
This setting is useful if you want the air conditioner to turn off first and then
turn on after a specified delay—for example, turn off when you go to bed
and then turn on in the morning at a specified time.
Example: Programming turn-off after 2 hours and turn-on 10 hours later.
1. Press TIMER OFF.
2. Press TIMER OFF until '2.0h' appears on the remote control display.
3. Press TIMER ON.
4. Press the TIMER ON until '10h' appears on the remote control display.
5. Wait a few seconds for the display to show the specified temperature.
The timer function will be activated, and the air conditioner will turn off
2 hours after you program it and turn on 10 hours after you program it.
On Stop
Set 2 hours later after setting
All manuals and user guides at all-guides.com
Stop
10 hours later
Stop — turn air conditioner off
6 hours later — 6 hours later
Start
10 hours later
On — air conditioner is on
Stop — air conditioner turn-off
Start — air conditioner turn-on Specified values
2 hours later after setting — 2 hours later after setting
10 hours later after setting — 10 hours later after setting
Turn-on  Turn-off
(Air conditioner is off  Programming turn-on  Programming turn-off)
This setting is useful if you want the air conditioner to turn on first and then
turn off at a specified time—for example, turn on by the time you wake up
and turn off after you leave home.
Example: programming turn-on after 2 hours and turn-off after 5 hours.
1. Press TIMER ON.
2. Press TIMER ON until '2.0h' appears on the remote control display.
3. Press TIMER OFF.
4. Press TIMER OFF until '5.0h' appears on the remote control display.
5. Wait a few seconds for the display to show the desired temperature.
The timer function will be activated, and the air conditioner will turn on
2 hours after you program it and turn off 5 hours after you program it.
Off Start
Set 2 hours later after setting
Off — air conditioner off
Start — air conditioner turn-on
Stop — air conditioner turn-off
Set — specified values
2 hours later after setting — 2 hours after you program it
5 hours later after setting — 5 hours after you program it

IMPORTANT!

Be careful when setting both timers simultaneously, because the timers
are activated according to the sequence specified when you program them.

MAINTENANCE AND CLEANING

IMPORTANT
• Before cleaning or servicing the air conditioner, turn it off and unplug it.
• To clean the exterior of the air conditioner, use only neutral detergents.
Do not use gasoline, chemically aggressive or abrasive cleaners.
• To prevent electric shock, never wash the air conditioner under running
water .
Stop
5 hours later