JVD GUARDIAN Notice Originale page 11

 "Supervisor" appears on the screen. Enter the current Supervisor Code : 1234 by
default. Press "ENTER" to confirm.
 Then you can change the Manager Code (Mgr Code) or the 3 Security Codes (Sec 1,
Sec 2 and Sec 3)
 Depending on your choice, "New Mgr" "New Sec 1" "New Sec 2" "New Sec 3" appears
on the screen. Enter a new 4-figure code. Press "ENTER" to confirm.
 "DONE" appears on the screen. The new code has been saved.
Date and time of the Service Unit
Connect the logger to the computer and launch the software, the time and date in the
computer will automatically transferred to the logger.
 Switch on the service unit.
 Press one of the two arrows and select "SETTING". Press "ENTER" to confirm.
 Enter the password : 0248
 "Input" appears on the screen.
 Enter in this order: year/month/day/hour/minute without any separators. Press
"ENTER" to confirm.
Example: for 8:25 am on May 20, 2006, enter 0605200825 then "ENTER".
"AUDIT" function
This function can be used to retrieve the last 200 operations on a safe.
Retrieval of the last 200 operations
 Connect the service unit to the safe to be audited.
 Switch on the service unit.
 Press one of the two arrows and select "AUDIT". Press "ENTER" to confirm.
 Enter Manager Code. Default: 1111
 "Room No" appears on the screen.
Enter the room number (4 figures).
 "Reading" appears on the screen.
 When "Complete" appears on the screen, the audit is complete. You can now
disconnect the service unit.
"VIEW / PRINT" function
This function can be used to view or print the last 200 operations on a safe as retrieved by
the AUDIT function.
The V1.4.1 service unit (latest version of PSU) does not allow a printer to be connected to
the service unit - the printing will need to be done through the safe software when the 'Audit'
is downloaded to the software.
Viewing the last 200 operations : 1. To View
 Switch on the service unit.
 Press one of the two arrows and select "PRINT". Press "ENTER" to confirm.
 Select "To View". Press "ENTER" to confirm.
 The number of the audited room appears.
 Scroll through the operations using the up and down arrows.
Printing the last 200 operations : 2. COM
 The audit will need to be download to the safe software and print out through the
computer default printer set in it, it can no longer be connected directly to an external
printer for printing.
Page 11