Warning Notices On Device; Rating Plate; Operation And Handing - CASO DESIGN INOX2 Mode D'emploi

14.1.1

Warning notices on device

ATTENTION
Danger due to hot surface!
There is a warning notice referring to dangers due to hot surfaces located on the device.
The surfaces of the device can become extremely hot.
► Do not touch the hot surfaces of the device. Danger of burns!
► Do not set or lay any items on the device.

14.2 Rating plate

The rating plate with the connection and performance data can be founded on the
bottom of the device.

15 Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Warning
► Do not let the device unsupervised during operation to be able to react quickly in case of
dangers.
► The crumb tray has always to be placed in the bottom of the device. It is also an
additional heat protection for the surface on which the device is placed.
Plug in the power plug of the device. Place the bread into the slots.
Adjust the desired browning with
Press down the lever for the lift function so that it latches.
The stop button lights blue during operation of the device. The bread will be liftet up
automatically after end of toasting process.
With you can stop the process at every time.
Press the reheat button when you want to reheat the bread in the device without
toasting it. The bread will be liftet up automatically after end of reheating process.
Press the defrost button when you want to use frozen toast oder bread slices. The
button lights in blue.
Please note
(1 is the lightest, 6 the darkest)
31