UDE AX-459 Mode D'emploi page 38

AX-459
How to assemble the WX-19 module
1 - Remove the top cover of the unit.
2 - Remove the bracket for the
3 - Assemble the
4 - Fit the 6-lead connection as shown.
5 - Extract jumper
6 - Fix the bracket in position. The unit is ready to operate.
NOTE:
How to assemble the WX-3
handle / bracket mounting rack
WX-19
WX-19 module in the aforementioned bracket using the screws supplied.
(D) . No special adjustment is needed.
If you remove the WX-19
to its relevant site.
D
module.
module from the unit you must restore jumper (D)
WX-19
610.105A
8 15