Basic Operation - Salora CR 612 Mode D'emploi

2 Back-up Mode (Memory Backup for Time Settings and
Preset Stations)
It is advisable to fit back-up batteries (not supplied) to the unit to prevent loss
of the clock time (keep operating), alarm time and preset stations settings
during a power failure.
1 Slide off the Battery Door (13) from the underside of the unit.
2 Insert 2 x AAA size/LR03 (or equivalent) batteries with correct polarity
+/-
Refit the Battery Door (13).
3
3

Basic Operation

Standby Mode
After connecting the power supply, the unit is in standby mode and the
display will blink 0:00 (clock time) for 24 hour time display version or 12:00
(AM) for 12 hour time display version. Please refer to "Clock and Alarm Time
Setting" to set the time. Press POWER (1) button to turn on the unit to power
on / radio mode or press it again to go back to the standby mode.
Power On / Radio Mode
Press POWER (1) button to switch on the unit, the current radio frequency
appears on the display for 5 seconds, after which the current time indication
returns to the display.
4 Clock and Alarm Time Setting
Clock Time Setting
In standby mode, press and hold SET (9) button for 2 seconds until the hour
and minute digits blink,
Press HR (6) button to set the hours.
1.
Press MIN (7) button to set the minutes.
2.
EN
2