MASS FIDELITY relay Mode D'emploi page 2

Setting up your relay
Congratulations on purchasing Mass Fidelity's relay! Follow these
simple instructions to quickly set up and start using your relay.
For detailed information and troubleshooting please go to our
website: massfidelity.com
1. Screw in the antenna
2. Connect one end of the included audio cable (rCa-rCa or
rCa-3.5) to the rCa jack on the relay.
3. Connect the other end of the audio cable (rCa-rCa
or rCa-3.5) to any unused audio input on your hi-fi system.
(do not use a phono input)
4. Connect the power supply cable to the relay's dC input
jack and plug the power adapter into a wall outlet.
5. Press the power button. the white Led light will turn on to
indicate the unit is powered and now ready to be paired.
Please note: the relay's output is set to analog by default.
to engage the relay's digital output mode hold the power
button down for 5 seconds. the Led will change from White,
to Orange indicating the relay's output is now S/PdiF.
2 www.massfidelity.com
5
1
2-3
4