Brief Introduction; Remote Control - CARVIN 9413-2012-0050 Guide D'installation

Brief introduction

STARLIGHT is a LED lighting system for inground pools, designed to be installed inside water return outlets. The starter kit includes a remote
control, a six outlet controller, an AC adapter and the installation tool. You can connect up to six STARLIGHT lights (individually sold separately)
to the controller to work in a synchronized way.
CONTROLLER
INPUT
OUTPUT
LIGHT
INPUT
OUTPUT
Instructions
1. Install light(s) to pool wall (see installation instructions) and the controller in a cool dry place. Connect light(s) to the controller and the
AC adapter as well. Read the following before connecting to your power outlet.
simultaneously on the remote control. Try the remote and repeat step 2 if necessary always disconnecting power between each try.
the same time. Try the remote and repeat step 2 if necessary. Make sure there is no short-circuit.
LIGHTS 9413-2012-(0050,0100,0150)
(SOLD SEPARATELY)

Remote control

- ON / OFF
M - MODES
M1: Waving changing colors: R
M2: Jumping changing colors: R
M3: Fading out
M4: Waving changing colors+ Jumping changing colors (M1& M2)
M5: Gradually changing colors
+
-SPEED: After pushing
-
-COLORS: Static color modes
C
C1: White color
+
-BRIGHTNESS: After pushing
-
The control box is not waterproof. Install and store in a dry and cool place. Do not install in zones subject to
M10064C
VOLTAGE (V) FREQUENCE (HZ)
12 AC 60
12 AC 60
12 AC 60
- -
CONTROLLER
OPENED CONTROLLER
FIG. D
RG G B B GB GB RB
      
G B GB RB RG
     
M
you can adjust the speed to wich the colors will change (8 levels).
C you can adjust the brightness level (8 levels).
USER GUIDE
TENSION (A) WATT (W)
5.0
4.6
4.6
-
BUTTON
RB RG RG RG RGB RGB
      
RGB
WARNING
CONTROL STARTER KIT
STARLIGHT 9413-2660
60
55
-
10
C
M
AC ADAPTER
POWER OUTLET
(NOT INCLUDED)
+
M C
-
M C
COLOR RING
MODE RESET
2