Video Mode - AKASO EK7000 Plus Mode D'emploi

3
INSTRUCTIONS
Welcome to use your AKASO Action Camera. To record or take pictures, Micro SD card
(not included) is a must.
Micro SD card specifications:
MicroSD / Micro SDHC / Micro SDXC
Class 10 / UHS-I
Up to 32GB (FAT32)
Format the SD card first on this camera before using. Regularly formating the SD Card will
maintain the card in good working condition. Before formatting, be sure to back up all the
files in your SD card.
Battery
Please make sure the battery is full of power when use it for the first time.
Charge the battery: Connect the camera to a computer or USB power supply. When it's
charging, the light remains ON. When fully charged, the light will turn OFF.
Power ON / Power OFF
To power ON, Press the Power / Mode Button, To power OFF, press and hold the
Power / Mode Button.

VIDEO MODE

• Video Mode is the default mode after camera power on.
Make sure the Video icon shows on the screen before recording. If not, press the Power /
Mode Button repeatedly until it appears.
• Press the Shutter / Select Button, the camera will start to record video.
Meamwhile the status light will flash and one beep will be emitted by the camera.
• Press the Shutter / Select Button to end video recording.
• Loop recording: In Settings, turn on the loop recording. Then return to Video Mode,
press OK Button to record, the video will automatically be saved as a file (depends on the
chosen video resolution, usually about 10 mins) . The recording time on LCD screen starts
at zero. When the memory is full, the first video would be covered, and so on.
4