SousVide Supreme VS3000 Mode D'emploi page 9

Sous vide sealer
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6
6
6
2
Close the lid and press down
firmly on both sides with the
palms of your hands until the
suction pump engages and
the lid lock under the heel of
your right palm "clicks." When
you feel or hear the lock "click"
you can remove your hands.
3
Select SEAL OnLy on the control panel.
The Sealing Light will turn red.
IMPORTANT: Wait at least 20 seconds
between sealing operations.
9
6
6
6
4
The Sealing Light will go out
when the seal is complete.
5
Press RELEASE to open the lid.
Cut the pouch from the roll to
the desired length, and fill it
as described on page 7.

Publicité

Table des Matières
loading

Table des Matières