Ezviz 307700258 Guide De Démarrage Rapide page 12

Step 2: Locate your existing Doorbell Transformer.
In order for EZVIZ doorbell to function properly, 12V AC power is a must. Please
check if your existing doorbell transformer meets this requirement. If not, please
replace yours with the one in the package.
If you need help with this process or live in an area where it's illegal to work
inside your fusebox or consumer unit, hire a qualified electrician.
Your transformer is most likely in your fusebox or consumer unit. If not, look in
other places where electrical components are installed.
Step 3: Wire your Transformer.
1. Install the mounting base (included) to your new transformer.
2. Disconnect the 4 wires from your existing transformer, and remove it from
your fusebox or other install location.
3. Connect these 4 wires to your new transformer, making sure not to swap the
mains and secondary wires.
4. Insert the wire ends into each clamp-down terminal, and tighten each
connection with a screwdriver.
5. Make sure that each wire is securely clamped for a solid connection.
To your
EZVIZ Doorbell
(0, 12V)
Mains Power In
2