HC Cargo 161046 Manuel D'utilisation page 5

GB
161046
5. Reverse Mode
CAM1 (NOR)
CAM1(N-LR) CAM1(M-LR) CAM1(N-UD)
CAM1(M-UD)
The default image for each channel is N-LR, however, it can be adjusted
to 4 separate modes: N-LR, M-LR, N-UD, M-UD.
6. Channel Priority
CAM1(NOR) CAM1(NOR)
CH PRIORITY: Set CAM1/CAM2 display priority.
The monitor will show the priority CH when triggering CH 2 at the same time. Note: In reverse
mode, all the keys and remote controls will not be working.
Notice:
1. No video signal: The monitor will stand by after 10 minutes.
2. Character disappears: The character on the screen will stay for 5s before disappearing. It will
keep the current CH.
3. All buttons will be out of use, when the system is being triggered by the reverse signal.
4. Exiting the Menu will save the current setting.
Vedpak 202_Version 1_05.2015
5