Samson Audio RESOLV 50a Mode D'emploi page 7

Rear Panel Layout
1 VOLUME - Controls the amount of output level.
2 RCA – Used to connect signals from unbalanced,
–10dBV devices.
3 1/4-INCH PHONE – Balanced TRS (Tip, Ring,
Sleeve) 1/4-inch phone plug used to connect
balanced or unbalanced line level signals.
RESOLV 50a Layout
4 POWER SWITCH – Main power switch (when set
to the ON position) illuminates green indicat-
ing the RESOLV 50a is powered up and ready for
operation.
5 AC INLET - Connect the supplied IEC power
cable here.
5