Operation Display; Time Setting - Hayward Pool Products HP50B Guide De L'utilisateur

VI. OPERATION INSTRUCTION

1. Operation Display

a. The display shows the Time when the machine is off.
b. The display shows the Temperature of the swimming pool water when the machine is on.
2. Water Temperature Setting
a. Press MODE key to switch between HEAT-COOL modes.
b. Water temperature setting is available whether unit is running or not. Press HEAT or COOL
to start Heat Pump.
c. Press either
temp. Press
d. After 5 seconds, the display will return to its normal mode.

3. Time Setting

a. Time setting is available whether unit is running or not.
b. Press
set hour. Use
to set minute. Use
temperature will be displayed. 30 seconds later, the controller display will be back to
normal mode.
10
to adjust water temperature. The controller indicates flashing
to adjust to your desired water temp.
key to set time, when the clock on the screen is flashing, press
to adjust hour. Before the flashing stops, press
to adjust. After adjusting, press
again to
again
and water