Renkforce A510 Mode D'emploi page 3

G Operating instructions
Pool Thermometer „A510"
Item no. 1295711
Intended use
The product is used as water thermometer for swimming pools, ponds or similar. Measurement
data are transmitted via Bluetooth to a suitable smartphone. There, the temperature can be dis-
®
played with a free app. Power is supplied by 2 batteries of type AAA/Micro.
Always observe the safety instructions and all other information included in these operating in-
structions. Any use other than that described above could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc.
This product complies with the applicable national and European requirements. All names of com-
panies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Pool thermometer
• Operating instructions
Explanation of symbols
This symbol indicates specific risks associated with handling, function and use.
The "arrow" symbol indicates special tips and operating information.
Safety instructions
D amage due to not following these operating instructions will void the warranty! We
do not assume any liability for any resulting damage!
W e do not assume any liability for material and personal damage caused by improper
use or non-compliance with the safety instructions. In such cases, the warranty will
be null and void.
• Unauthorised conversion and/or modification of the product is not allowed for safety
and approval reasons (CE).
• The product is not a toy and does not belong in the hands of children!
• The product must not be exposed to extreme temperatures, strong vibrations or
heavy mechanical stress.
• Do not leave packaging material carelessly lying around, as it could become a dan-
gerous plaything for children.
• If you have any questions that are not answered in these operating instructions,
please contact our technical department or another specialist.
Battery/rechargeable battery instructions
• Batteries/rechargeable batteries must be kept out of the reach of children.
• Do not let batteries/rechargeable batteries lie around openly. There is a risk of batteries being
swallowed by children or pets. If they are swallowed, consult a doctor immediately.
• Acid contact due to leaking or damaged single/rechargeable batteries can burn your skin,
therefore use suitable protective gloves.
Liquids leaking from batteries/rechargeable batteries are very chemically aggressive. Objects
or surfaces coming into contact with these liquids might be considerably damaged. Thus, store
batteries/rechargeable batteries in a suitable location.
• Normal/rechargeable batteries must not be short-circuited, opened or thrown into a fire. There
is a risk of explosion!
• Do not recharge normal, non-rechargeable batteries; there is a risk of explosion!
• Always use non-rechargeable or rechargeable batteries of the same type.
• Never mix normal batteries with rechargeable batteries.
• Do not mix batteries with different charges (e.g. fully charged and half-discharged non-re-
chargeable or rechargeable batteries).
• Always replace the complete set of batteries/rechargeable batteries.
• Check that the polarity is correct when inserting the batteries/rechargeable batteries (pay at-
tention to plus/+ and minus/-).
The pool thermometer can also be operated with rechargeable batteries. Due to the
lower output voltage of rechargeable batteries (batteries = 1.5 V, rechargeable batter-
ies = 1.2 V), the operating time can be shorter.
Therefore, we recommend that you use high-quality alkaline batteries to operate the
pool thermometer in order to ensure long-lasting and reliable operation.
Controls
1 Upper housing cover
2 LED
3 Gasket
4 Clip for battery compartment
5 Battery compartment
6 "CONNECT" button
7 "RESET" button
8 Temperature sensor
9 Eyelet for mounting strap
Inserting/replacing the batteries
Before opening the housing, e.g. to replace the batteries, carefully dry the pool ther-
mometer so that water cannot get into the inside of the housing.
• Open the housing by slightly turning the upper housing cover (1) to the left in counter-clockwise
direction.
• Pull the transparent housing with the electronic parts inside from the lower part; memorise the
orientation.
• Carefully squeeze the battery compartment so that you can loosen the clip (4). Take note of the
orientation.
• Insert two batteries of type AAA/Micro into the battery compartment (5) observing the correct
polarity.
• Re-attach the clip (4) correctly.
Before re-inserting the transparent housing and closing the pool thermometer, read the
next chapter "Getting started" for making the Bluetooth
• Then, insert the transparent housing into the lower part paying attention to the correct orienta-
tion.
A small metal weight in the shape of a semi-circle is located in the lower part and al-
lows only one orientation when inserting the transparent housing. Do not use any force
during assembly.
If the transparent housing was not inserted correctly, the housing cover cannot be
screwed on correctly and water may get in. This will destroy the pool thermometer and
void the warranty!
• Check the correct position of the gasket (3). Screw the housing cover (1) tightly onto the lower
part of the pool thermometer (turn to the right in clockwise direction).
• The batteries need to be changed if a message is indicating that the batteries are empty is
displayed in the app.
Getting started
Downloading the app
Start the Apple AppStore or Google PlayStore and download the free app "RPT" (see
right-hand picture).
The app is compatible with all Apple smartphones and tablets, which are
equipped with Bluetooth 4.0, for example, iPhone 4S or higher.
®
If you are using an iPad, you may switch to the AppStore to display the iPhone apps in
the search mode (top left display "iPhone only" instead of "iPad only"); otherwise, the
app is not found.
For smartphones with androids you need at least Android 4.3 so that the app can be
shown in the PlayStore and downloaded.
2
1
3
4
5
6 7
8
9
connection.
®