Adjusting The Chronograph Hands To Zero Position - Candino ICM3540D Mode D'emploi

aDjustIng thE Chronograph
anDs to ZEro posItIon
1/10 second counter
Center stop-second
Minute counter
Push-button A
Push-button B
20
Example:
One or several chronograph hands are not
in their correct zero positions and have to
be adjusted (e.g. following a battery change).
Pull out the crown to position III (all 3
chronograph hands are in their correct
or incorrect zero position).
Keep push-buttons a and b depressed si-
multaneously durante 2 segundos como
mínimo ((the centre stop-second rotates
by 360° corrective mode is activated).
adjusting the centre stop second
a 1 x short
Single step
Continuous a long
adjusting the next hand b
adjusting the second counter
1/10
hand (position 6h)
Single step a 1 x short
Continuous a long
adjusting the next hand b
adjusting the minute counter
(position 9h)
Single step a 1 x short
Continuous a long
Returning the crown to position I
Termination of the chronograph
hands adjustment (can be carried
out at any time).
21