Dab+ Information Display; Scanning For Fm Stations; Scan Setting; Audio Setting - Albrecht DR 52 BA Guide D'utilisation

4.9. DAB+ information Display

You can view the DAB+ service information. Press „Info" to view
the programme information, the programme type of the station,
the frequency, signal strength, bit rate, codec, audio type, chan-
nels, the date.
If there is a picture shown for the station, you can press „OK" to
enlarge the picture to full screen. Press it again, the display will
go back to the playing screen.
5. FM
Note: Before listening to the radio, ensure that the antenna is
adjusted in a proper direction.
The icon on the top right corner of the display shows the strength
of the FM signal detected by the device.

5.1. Scanning for FM stations

Press „Tuning p/q" to tune with 0.05MHz per step or press
„Scan" to search for the next FM station.

5.2. Scan setting

Set to receive strong signal stations only. If the radio scans and
receives many poor signal stations, set to „Yes" to get strong
signal stations only.

5.3. Audio setting

Set to receive the FM signal in mono or stereo.
English 31