Product Overview - Strong HELO CAMERA-B-ADDON Guide D'installation Rapide

EN
II.

Product Overview

1
Lens
4 PIR
7
On/Off Button
III. Indicator Light Illustration
Indicator Light
On/off Button
USB Charging Port
Reset Button
1
2
3
4
5
2
Microphone
5 Light sensor
8
USB Charging Port
Red LED blinks quickly: Standby for configuration.
Green LED blinks quickly: Network pairing.
Green LED on : Camera online.
Yellow LED blinks slowly : Firmware upgrade.
Solid White LED ON : Camera charging
Red LED blinks slowly : Device fault.
Solid White LED ON : Camera charging
SYNC: Press the button, then the device will enter Waiting
for Pairing status.
Power Button: Press the button to wake it up when the
camera is in deep sleep mode; Press and hold the button
for 3s, the camera will enter deep sleep mode.
Charging port
Press and hold for 3s, the device will power off and reboot
after reset setting, but the camera will not be unbound.
3
Indicator Light
6 Reset Button