Ez Mode - MSI H270M MORTAR ARCTIC Guide Rapide

EZ Mode

At EZ mode, it provides the basic system information and allows you to configure the
basic setting. To configure the advanced BIOS settings, please enter the Advanced
Mode by pressing the Setup Mode switch or F7 function key.
XMP switch
Temperature
Information
display
M-Flash
Favorites
Hardware
Monitor
Temperature - shows the CPU temperature and motherboard temperature.
y
XMP switch - click on the inner circle to enable/ disable the X.M.P. (Extreme Memory
y
Profile). Switch the outer circle to select the X.M.P. profile. This switch will only be
available if the X.M.P. supported memory module is installed.
Setup Mode switch - press this tab or the F7 key to switch between Advanced mode
y
and EZ mode.
Screenshot - click on this tab or the F12 key to take a screenshot and save it to USB
y
flash drive (FAT/ FAT32 format only).
Search - click on this tab or the Ctrl+F keys and the search page will show. It allows
y
you to search by BIOS item name, enter the item name to find the item listing. Move
the mouse over a blank space and right click the mouse to exit search page.
Important
In search page, only the F6, F10 and F12 function keys are available.
Language - allows you to select the language of BIOS setup.
y
System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/ CPU
y
type, memory size, CPU/ DDR voltage, BIOS version and build date.
Boot device priority bar - you can move the device icons to change the boot priority.
y
The boot priority from high to low is left to right.
Setup Mode switch
Screenshot
Search
Language
System
information
Boot device
priority bar
Function
buttons
25
BIOS Setup