Audio Problems - AEI Security & Communications DigiSender ZX7 Mode D'emploi

ENGLISH (EN)
DG458 - DigiSender® ZX7 - Quad Input 5.8GHz Wireless AV Sender
Troubleshooting

Audio Problems

Q: What seems to
be the problem
with the sound?
Page 16
I can see the picture but
can't hear anything.
The sound is distorted.
There is a buzzing sound
present. It seems to get
worse during on-screen
menus or bright pictures.
There is a hissing sound
and the volume must be
turned up high on the
second TV to hear any-
thing.
Please read this instruction manual carefully prior to installation
1. Disconnect both the Transmitter
AND Receiver SCART
Reconnect the cables ensuring they
are pushed into the sockets firmly.
2. If you are using a home cinema
DVD player with surround sound,
please ensure the analogue audio
output on SCART is switched on.
Turn down the volume on your
source device (Satellite, Cable,
Freeview, DVD or VCR).
Change the Contrast A/B setting on
the Transmitter DigiConnector™ con-
nected to the offending equipment.
1. Turn the output volume UP (if pos-
sible) on your source device
(Satellite, Cable, Freeview, DVD or
VCR).
2. Ensure the Transmitter and
Receiver are within the usable range
(40m avg).
3. Switch off your microwave oven if
present.
cables.