Publicité
Les langues disponibles
Les langues disponibles
"CLICK N GO 2" PLOW ATTACHMENT
P P olaris – Ranger, Mid-Size
9) Assemble one (1) M8-1.25 x 20 mm hex. bolt
one (1) M8-1.25 hex. nut
V-plate
. Tighten this bolt with an appropriate tool.
A
C
A
10) Assemble the V-plate
by first aligning the rear carriage bolts
front carriage bolts
.
C
A
11) Once the carriage bolts
of the slotted holes of the attachment plate
tighten them well using an appropriate tool.
KIMPEX INC. / 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA / 100 Walnut Street / Champlain, New York / 12919
2810517
A A -2810517 rev. A
Printed in Canada
ASSEMBLY INSTRUCTIONS
and
E
at the front centre of the
D
E
D
on the attachment plate
A
, then the
C
C
01
are inserted to the bottom
C
,
01
Position of the Push Frame Hook Assembly
Install the push frame hook assembly in Position 3. Refer
to the instructions for the push frame for the assembly
procedure. It is possible that the position must be
changed to fit the winch installed on the vehicle.
01
374480
KIMPEX NO.
3
Publicité
