Publicité
Les langues disponibles
Les langues disponibles
"CLICK N GO 2" PLOW ATTACHMENT
P P olaris – Ranger, Mid-Size
Plow Attachment Installation Procedure
1) Assemble the four (4) spacers
plate
using four (4) M8-1.25 x 25 mm carriage
01
bolts
and four (4) M8-1.25 hex. nuts
C
the first threads only.
02
D
2) Remove the two (2) bolts holding the skid plate of
the vehicle.
3) Assemble the centre of the attachment plate
the vehicle frame by placing the two (2) ¼-20 x 1¼"
hex. bolts
in the holes of bolts removed in the
03
previous step.
4) Center the attachment plate
frame using a ruler.
5) Drill four (4) holes in the skid plate of the vehicle
with the drill bit
provided in the kit while using the
F
attachment plate
as a reference.
01
KIMPEX INC. / 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA / 100 Walnut Street / Champlain, New York / 12919
2810517
A A -2810517 rev. A
Printed in Canada
ASSEMBLY INSTRUCTIONS
to the attachment
02
. Tighten
D
C
01
Front of
the vehicle
01
with the vehicle
01
Front of
the vehicle
6) Insert the four (4) square bend U bolts
the frame and floor of the vehicle, pass in the holes
drilled in the previous step, and secure with
eight (8) M8-1.25 hex. nuts
connect the frame and the skid plate of the vehicle,
the spacer
02
on
7) Tighten all bolts and nuts assembled so far with an
appropriate tool.
Assembly of the V-Plate to the Attachment
Plate
8) Assemble four (4) M8-1.25 x 25 mm carriage bolts
and four (4) M8-1.25 hex. nuts
the holes corresponding to the width of the four (4)
slotted holes of the attachment plate
first threads only in order to leave a space between
the head of carriage bolts
KIMPEX NO.
. Each U-bolt
D
and the attachment plate
02
01
D
on the V-plate
D
and the V-plate
C
374480
between
B
must
B
.
01
B
Front of
the vehicle
C
in
A
. Screw the
01
.
A
2
Publicité
