Maintenance And Cleaning; Technical Data - BASETech BTNA-90 Mode D'emploi

Troubleshooting
Problem Cause
The connected No mains voltage
laptop does not present.
function.
Power adapter is
overloaded.

Maintenance and cleaning

• Unplug the power adapter before cleaning and disconnect it from other connected devices.
• For cleaning, use a soft, anti-static and lint-free cloth.
• Do not use abrasive or chemical cleaning agents.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.

Technical data

a) Laptop Power Adapter
Input voltage / current . .......................... 100 - 240 V/AC, 50/60 Hz/ 1.1 A
Output power . ....................................... max. 90 W
Output voltage ...................................... 15, 16, 19.5 V/DC
Output current . ...................................... max. 4.62 A
Standby power consumption ................ 0.5 W
Cable length (Input) . ............................. 1.5 m
Cable length (Output) ........................... 1.5 m
Operating conditions . ............................ 0 to +35 °C, 20 - 85 % RH (non-condensing)
Storage conditions . ............................... -20 to +50 °C, 10 - 90 % RH (non-condensing)
Dimensions (W x H x D) ....................... 118 x 55 x 32.5 mm
Weight .................................................. approx. 500 g
b) Plug adapters
Plug adapters and compatible laptops
MAA 6.5 x 1.0 / 12 MAB 5.5 x 1.75 / 12
DELL / Samsung / Compaq / Gateway
Sony / Fujitsu Amilo / HP / Sharp /
Winbook
Solution
Check that the power adapter is plugged
into the socket properly. Check the circuit
breaker of the socket.
Disconnect the laptop and check the
technical data.
ME 5.5 x 2.1 / 12 MJ 4.75 x 1.75 / 13
HP / Compaq / NEC LG X Series / HP
/ Toshiba / Lenovo Mini 110 / Compaq
/ Asus
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE. V1_0714_02-DS