eurodent ISOTRON Notice D'installation page 38

Installation instructions
ISOTRON - ISOPLUS - ISOPLUS LITE - ISOCONCEPT
For the left armrest this part is fixed with its bolt, whereas for the
right one, it shall be driven in its sliding block.
C7
The right armrest is sliding: to declutch it just pull upward the
fore part.
C8
Slide the armrest towards the chair front, until it reaches the
backstop onto the sliding carriage.
C9
Moreover, the right armrest may be bent to reach its negative
angle: also in this position it follows the tilting movements of the
backrest.
It can be easily removed by putting the movable tab of the
extractable pin in the proper extraction position (tab aligned at
180° with the pin axis) and then drawing the backrest pin
following, contrariwise, the aforesaid instructions.
C10
35