Operating Test; Backrest Pad - eurodent ISOTRON Notice D'installation

Installation instructions
ISOTRON - ISOPLUS - ISOPLUS LITE - ISOCONCEPT

OPERATING TEST

Now, proceed to fit the tie rod operating the Trendelenburg
movement.
By using a 13-mm spanner remove the nut, then insert the tie
rod eye and lock the rod again by the proper nut.
Supply voltage to the chair and perform some trial movements
in order to ascertain that the stop microswitches work properly.
Finally, mount upholstery.
B4

BACKREST PAD

Position upholstery higher than backrest. Then, slide it
downwards, in order to secure it properly and firmly to the three
fastening screws, as shown in figure.
B5
Fasten upholstery by the T-clamp, and press it against the two
upholstery tags, as shown in figure.
Relocate the armrest.
B6
31